dhcpcd-discuss

Hello,

I'm receiving this error after upgrading from dhcpcd 9.0.2 to 9.1.4
on OpenBSD-current. The result of which is that I no longer receive
IPv6 addresses on any interfaces.

dhcpcd_fork_cb truncated read 0 (expected 4)
ps_ctl_listen: read: Undefined error: 0

em0 is my external interface and em1 assigned to be the internal
interface. I am using dhcpcd for IPv6-PD with rad providing a /64
to my internal LAN.

/etc/dhcpcd.conf:
debug
                                                                               
allowinterfaces em0
                                                                               
# Allow users of this group to interact with dhcpcd via the control socket.
controlgroup wheel
                                                                               
# Inform the DHCP server of our hostname for DDNS.
hostname                   
                                                                               
# Use the hardware address of the interface for the Client ID.
#clientid
# or
# Use the same DUID + IAID as set in DHCPv6 for DHCPv4 ClientID as per RFC4361. 
# Some non-RFC compliant DHCP servers do not reply with this set.
# In this case, comment out duid and enable clientid above.
duid

# Persist interface configuration when dhcpcd exits.
persistent

# Rapid commit support.
# Safe to enable by default because it requires the equivalent option set
# on the server to actually work.
option rapid_commit

# A list of options to request from the DHCP server.
option domain_name_servers, domain_name, domain_search, host_name
option classless_static_routes
# Respect the network MTU. This is applied to DHCP routes.
option interface_mtu

# Most distributions have NTP support.
#option ntp_servers

# A ServerID is required by RFC2131.
require dhcp_server_identifier

# Generate SLAAC address using the Hardware Address of the interface
#slaac hwaddr
# OR generate Stable Private IPv6 Addresses based from the DUID
slaac private

ipv6only
script ""

interface em0
        ia_na 0
        ia_pd 1 em0/1 em1/2

Using the default configuration file does yield an IPv6 address on
em0. Looking at the differences between mine and the default,
the PD config is the only obvious one.

Let me know if additional information to properly troubleshoot is
required

Best,
Lucas